3-Inch Lift Kit for Ram 1500 & 1500 Classic 4WD (2012-2024) — Part 31230
- Fits 2012-2018 Ram 1500 4WD and 2019-2024 Ram 1500 Classic 4WD — review the exclusions below first
- Does not fit 3.6L Pentastar V6, 4-corner air-suspension trucks, or Warlock models with the 1-inch factory lift
- Forged aluminum upper control arms with pre-installed POM ball joints for added articulation
- Bolt-on install with no cutting or drilling — downloadable installation guide available
- On factory wheels, run no wider than an 11.5 inch tire; a 0.25 wheel spacer (SKU 1065) adds clearance for aggressive sidewalls
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 3.6L Pentastar V6 engine
- Models with 4-Corner Air-Suspension found standard on Rebel and Limited models
- Warlock models
This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped click here. Tire and Wheel Details Models retaining factory wheels are advised to run no wider than an 11.5" wide tire. For additional clearance on models equipped with aggressive side wall tires a 0.25 wheel spacer is recommended SKU: #1065. Fitment on this page is based on the manufacturer’s application data.
About this part
3-Inch Lift Kit, fitment-checked
Rough Country 31230 is a 3-inch lift kit for 2012-2018 Ram 1500 4WD and 2019-2024 Ram 1500 Classic 4WD, with forged aluminum upper control arms and pre-installed POM ball joints. It does not fit the 3.6L Pentastar V6, trucks with 4-corner air suspension, or Warlock models with the 1-inch factory lift.
This 3-inch lift kit for the 2012-2018 Ram 1500 4WD and 2019-2024 Ram 1500 Classic 4WD bolts on without cutting or drilling and removes the factory rake front to rear. The replacement struts will not work with the 3.6L Pentastar V6, and trucks equipped with 4-corner air suspension are excluded; check your setup before ordering. Warlock models already carry a 1-inch factory lift and are also excluded. Trucks keeping factory wheels should stay at 11.5 inches or narrower on tire width. A downloadable installation guide is available.
Specifications
Specs
| Brand | Rough Country |
| Part number | 31230 |
| UPC / GTIN | 00843030110055 |
| Lift height | 3 in |
| Shipping weight | 35.2 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here