3-Inch Lift Kit with N3 Shocks for Ram 1500 4WD (2012–2024) — Part 31231
- Fits Ram 1500 4WD (2012–2018) and Ram 1500 Classic (2019–2024) — check the exclusions below against your truck
- Does not fit the 3.6L Pentastar V6, 4-corner air-suspension models, or Warlock models
- Kit contents: forged upper control arms, N3 shock pair, loaded strut pair, and 2.5 boxstruts
- Bolt-on install with no cutting or drilling — downloadable installation guide available
- Trucks keeping factory wheels should stay at 11.5 in tire width or narrower; a 0.25 wheel spacer (SKU 1065) adds clearance for aggressive sidewalls
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 3.6L Pentastar V6 engine
- Models with 4-Corner Air-Suspension found standard on Rebel and Limited models
- Warlock models
This package is an available upgrade across multiple sub-models. Tire and Wheel Details Models retaining factory wheels are advised to run no wider than an 11.5" wide tire. Fitment on this page is based on the manufacturer’s application data.
About this kit
3-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 31231 is a 3-inch lift kit for Ram 1500 4WD (2012–2018) and Ram 1500 Classic (2019–2024). The package pairs forged aluminum upper control arms with an N3 shock pair, a loaded strut pair, and 2.5 boxstruts. It does not fit the 3.6L Pentastar V6, models with 4-corner air suspension, or Warlock models.
This 3-inch lift kit for the Ram 1500 4WD (2012–2018) and 1500 Classic (2019–2024) bolts on without cutting or drilling, so the factory rake comes out over a driveway weekend. The box holds forged upper control arms with pre-installed POM ball joints, an N3 shock pair, a loaded strut pair, and a 2.5 boxstrut set. Confirm your engine and suspension before ordering: the replacement struts are not for the 3.6L Pentastar V6, 4-corner air-suspension trucks, or Warlock models with their 1-inch factory lift. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Forged Upper Control Arms 31201$339.95
- 1× N3 Shock Pair 23141
- 1× Loaded Strut Pair 501086
- 1× 2.5 Kit Boxstruts 1358
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 31231 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 31231 |
| UPC / GTIN | 00843030191054 |
| Lift height | 3 in |
| Shock package | N3 series |
| Shipping weight | 83 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch