5-Inch Lift Kit with N3 Shocks for Silverado/Sierra 1500 4WD
- Fits 2014-2018 Chevrolet Silverado 1500 and Sierra 1500 4WD, 2015-2018 GMC Sierra 4WD, and the 2019 Silverado 1500 LD 4WD
- Does not fit Denali or Denali Ultimate (Magnetic Ride Control) or eAssist ECO Hybrid models
- In the box: crossmembers, front and lower skid plates, control arm drop kit, fabricated rear blocks, loaded strut pair, N3 shock pair
- Runs factory 20-inch wheels; tires wider than 33x12.50 require offset wheels and may require trimming
- Cutting and drilling required - downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Denali or Denali Ultimate models
- Models with eAssist (ECO Hybrid) package
Requires cutting and drilling. To ensure adequate clearance when lowering the differential models equipped with a mass damper on the front differential must be removed. If wider than 33x12.50 tires are used offset wheels will be required and trimming may be required. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 29133 is a 5-inch lift kit for 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 4WD, plus the 2019 Silverado 1500 LD. The kit pairs loaded struts up front with an N3 shock pair out back and works with factory 20-inch wheels. It does not fit Denali or Denali Ultimate models with Magnetic Ride Control, or trucks with the eAssist (ECO Hybrid) package.
This 5-inch lift kit for the 2014-2018 Silverado 1500 and Sierra 1500 4WD ships as a complete boxed package: crossmembers, front and lower skid plates, a control arm drop kit, fabricated rear blocks, a loaded strut pair, and an N3 shock pair. Track width stays where the factory put it, and OEM 20-inch wheels still clear. Plan for cutting and drilling during the build, and note that trucks with a front differential mass damper need it removed for clearance. Running tires wider than 33x12.50 calls for offset wheels and possible trimming.
What’s in the box
Kit contents
- 1× Crossmembers 1290BOX16
- 1× 2014+ FR Skid Plate 1290BOX4
- 1× 2014+ Lower Skid Plate 1290BOX3
- 1× Control Arm Drop Kit 298BOX1
- 1× 5" RR Block Box 291BOX2
- 1× Loaded Strut Pair 501034
- 1× N3 Shock Pair 23158
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 29133 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 29133 |
| UPC / GTIN | 00843030183820 |
| Lift height | 5 in |
| Shock package | N3 series |
| Shipping weight | 211.72 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here