6 Inch Lift Kit for Chevy Silverado 1500 2WD (2019-2024)
- Fits supported 2019-2024 Chevy Silverado 1500 2WD and the 2022 Silverado 1500 LTD — review the full exclusion list below
- Excludes High Country with Adaptive Ride Control, two-piece rear driveshaft, rear mono-leaf spring, and 2018-body-style Classic trucks
- Aftermarket wheels 20 inches or larger with 4.5in backspacing required; test fit first, and some wheels need a .25in spacer (SKU 1065)
- High-clearance crossmember design with cast lifted knuckles; stock track width retained and no strut disassembly needed
- Cutting and drilling required — install time listed at 8-10 hours, with a downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- High Country models equipped with Adaptive Ride Control
- Models with two-piece rear driveshaft
- Models equipped with a rear mono-leaf spring
- "Classic" models (2018 body style) Requires cutting and drilling
- Factory wheels 20-inch or larger aftermarket wheels are required
Wheels must feature 4.5in backspacing to fit Please test fit wheels prior to installation Must verify compatibility of the aftermarket wheel with the 2019 and up GM larger brake caliper system. Some aftermarket wheels may require .25" wheel spacer SKU: 1065. Fitment on this page is based on the manufacturer’s application data.
About this kit
6 Inch Lift Kit, fitment-checked
Rough Country 23830 is a 6 inch lift kit for supported 2019-2024 Chevy Silverado 1500 2WD trucks, including the 2022 Silverado 1500 LTD. Factory wheels will not clear it: plan on aftermarket wheels 20 inches or larger with 4.5in backspacing, and confirm the wheel clears the larger GM brake caliper used from 2019 up. Cutting and drilling are part of the job.
This 6 inch lift kit for the 2019-2024 Chevy Silverado 1500 2WD covers Custom, WT, LT, RST, LTZ, SSV, and High Country trims, plus the 2022 Silverado 1500 LTD. Front hardware includes cast lifted knuckles, front and rear crossmembers, upper strut spacers, a front skid plate, and sway-bar drop brackets; the rear uses fabricated lift blocks with brake line brackets and U-bolts. Strut disassembly is not required, but cutting and drilling are. It does not fit High Country trucks with Adaptive Ride Control, two-piece rear driveshafts, rear mono-leaf springs, or 2018-body-style Classic models.
What’s in the box
Kit contents
- 1× Front Kit Box 23800991
- 1× 6in Kit Crossmember Box 217BOX11
- 1× FR Full Skid 217BOX3
- 1× 6in FR Kit Box 21700991
- 1× 6in Kit Dr Knuckle Box 21730BOX5
- 1× 6in Kit Ps Knuckle Box 21730BOX6
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 23830 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 23830 |
| UPC / GTIN | 00840269963735 |
| Lift height | 6 in |
| Shipping weight | 235 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here