MLC-6 Multiple Light Controller for Can-Am Defender (2016–2020)

About this part

MLC-6 Multiple Light Controller, fitment-checked

Rough Country 70955 is the MLC-6 multiple light controller, a six-circuit switch and relay system for listed 2016–2020 Can-Am Defender models. It wires directly to the battery through 8-gauge leads and lets you run six separate accessory or lighting circuits from one switch panel. Estimated install time is 3-4 hours.

The MLC-6 multiple light controller for 2016–2020 Can-Am Defender models handles six switched circuits from a single panel. Each circuit runs through a plug-in 40-amp cube relay and a 30-amp ATO fuse, with diodes fitted to stop LED field collapse and a 12 position terminal block for hooking up accessories. Power comes off the battery through 8-gauge leads with crimped and soldered terminals, protected by an inline 50-amp manually resetting circuit breaker, and a built-in low-voltage cut-off circuit guards the battery. Cabling is high-temp and abrasion resistant. Check the fitment list for your exact Defender trim and year.