MLC-6 Multiple Light Controller for Jeep Wrangler 4WD (1997-2006)

About this part

MLC-6 Multiple Light Controller, fitment-checked

The MLC-6 multiple light controller (Rough Country 70956) wires up to six accessory light circuits on the 1997-2006 Jeep Wrangler 4WD. It carries a 12-position terminal block, six 40-amp plug-in cube relays, six 30-amp ATO fuses, and a low-voltage cut-off circuit. It will not work on 2.4L 4-cylinder models.

This MLC-6 multiple light controller for the 1997-2006 Jeep Wrangler 4WD centralizes accessory lighting behind one switch panel. Six 40-amp cube relays and six 30-amp ATO fuses feed the 12-position terminal block, while diodes guard against LED field collapse and an integrated low-voltage cut-off protects the battery. Power comes off the battery through 8 gauge leads with crimped and soldered terminals, protected by an inline 50-amp manually resetting breaker. Wrangler-specific brackets and hardware are supplied. Confirm your engine first: 2.4L 4-cylinder models are excluded. Rough Country lists roughly 3-4 hours for installation and a downloadable installation guide is available.