Steering Box Brace for Ram 2500 and 3500 4WD
- Fits 2009-2010 Dodge Ram 2500/3500 4WD and 2011-2016 Ram 2500/3500 4WD
- Does not fit trucks with the electronic sway-bar disconnect option
- Ties the steering box pivot to both frame rails to limit flex and steering wander
- Bolt-on install listed at 2-3 hours; downloadable installation guide available
- Powder-coated black finish. Shipping weight: 22.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with electronic sway-bar disconnect option
About this part
Steering Box Brace, fitment-checked
A bolt-on steering box brace for 2009-2010 Dodge Ram 2500 and 3500 4WD and 2011-2016 Ram 2500 and 3500 4WD trucks. It anchors the lower pivot of the steering box to both frame rails, cutting frame flex and the side-to-side wander that comes with it. It does not fit trucks equipped with the electronic sway-bar disconnect option.
Heavy front tires and hard steering inputs flex the frame around the steering box; this brace spans both rails to hold that pivot point steady. Owners of 2009-2010 Dodge Ram 2500 and 3500 4WD trucks and 2011-2016 Ram 2500 and 3500 4WD trucks — Tradesman through Laramie Longhorn, plus Power Wagon — get tighter response and less play at the wheel, with less strain reaching the gear itself. Trucks ordered with the electronic sway-bar disconnect option are excluded. Finished in powder-coated black, listed at 2-3 hours to install, with a downloadable installation guide available.
Specifications
Specs
| Brand | Rough Country |
| Part number | 1066 |
| UPC / GTIN | 00843030100728 |
| Shipping weight | 22 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
| Installation guide | Downloadable PDF |
Why buy here