Long Arm Upgrade Kit for 2004–2006 Jeep Wrangler TJ Unlimited
- Fits 2004–2006 Jeep Wrangler TJ Unlimited 4WD only. Other TJ models are not covered
- Front: upper and lower adjustable arms, control arm mounting brackets, Rubicon compressor bracket, hardware
- Rear: upper and lower adjustable arms, track bar drop bracket, hardware
- Slip yoke eliminator with CV driveshaft recommended; Rubicon models still want the CV shaft
- Exhaust must be cut and rerouted clear of moving components
- About 8-9 hours to install. Shipping weight: 163.07 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits Unlimited models ONLY. A Slip Yoke Eliminator with CV Driveshaft is recommended to avoid driveline vibration. Rubicon models do not need a SYE kit or transfer case drop but a CV driveshaft is still recommended. Exhaust will have to be cut and rerouted to make sure it is away from the moving components. Fitment on this page is based on the manufacturer’s application data.
About this kit
Long Arm Upgrade Kit, fitment-checked
Unlimited models only. This long arm kit fits the 2004–2006 Jeep Wrangler TJ Unlimited in 4WD, and no other TJ. Front and rear both get upper and lower adjustable arms, with control arm mounting brackets and a Rubicon compressor bracket up front and a track bar drop bracket out back. The exhaust has to be cut and rerouted clear of the new hardware, and it is a full day in the driveway at 8-9 hours.
Everything here is aimed at articulation: X-Flex arms with greasable flex joints on a 2.5 in body and 1.25 in thread, upper joints pivoting up to 20 degrees and lowers up to 35, plus high-clearance lower control arms. Before you start, plan the driveline. A slip yoke eliminator with a CV driveshaft is recommended to keep vibration down; Rubicon TJs skip the SYE and the transfer case drop but still want the CV shaft. The exhaust needs cutting and rerouting away from moving components. Hardware is included at both ends of the vehicle.
What’s in the box
Kit contents
- 1× 663x Kit Box 1663BOX5
- 1× Kit Box 1663BOX6
- 1× Perf638 Kit Box 1638
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 63800U kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 63800U |
| UPC / GTIN | 00843030124953 |
| Shipping weight | 163.07 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
Why buy here
The fitment-first store
Keep looking
More Control Arms & Track Bars
