High Steer Kit with Front Track Bar Bracket for Wrangler
- Includes a high steer kit and a front track bar bracket
- Fits 2007-2017 Jeep Wrangler (4WD and RWD) with 2.5-6in suspension lift kits
- 3.5-4in of lift with a factory track bar; 3.5-6in with an adjustable track bar
- Requires the stock pitman arm; aftermarket drop pitman arms will not work
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits models with 2.5 - 6in suspension lift kits. This kit MUST be used with a stock pitman arm Does NOT work with aftermarket drop pitman arms This kit can be used on Jeeps with 3.5"-4" of lift if equipped with a factory track bar. This kit can be used on Jeeps with 3.5"-6" of lift with Rough Country's forged adjustable track bar or similar aftermarket adjustable track bar. Fitment on this page is based on the manufacturer’s application data.
About this kit
High Steer Kit with Front Track Bar Bracket, fitment-checked
Two parts in one box: a high steer kit and a front track bar bracket, matched for 2007-2017 Jeep Wrangler models with 2.5-6in of lift. The bracket resets the front track bar mounting point so the axle stays centered as ride height climbs, while the steer kit pulls the steering linkage geometry back toward where it belongs. The stock pitman arm must stay in place.
This is the bracket-equipped version of the Wrangler high steer setup, covering 4WD and RWD 2007-2017 Wranglers in Sport, Sahara, Rubicon, X, and Unlimited configurations. The high steer kit addresses linkage angle and bump steer; the front track bar bracket handles the other half of the problem by resetting the track bar mounting point on a lifted chassis. The lift window for the package is 2.5-6in, narrowing to 3.5-4in if you keep the factory track bar and opening to 3.5-6in with an adjustable one. The stock pitman arm is required.
What’s in the box
Kit contents
- 1× High Steer Kit 10600
- 1× Track Bar Bracket 1118
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 10601 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 10601 |
| UPC / GTIN | 00843030158187 |
| Shipping weight | 17.45 lb |
| Country of origin | TW |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
| Installation guide | Downloadable PDF |
Why buy here