Fitment-checked off-road parts  ·  Manufacturer-listed exclusions shown before you buy
TRAILFORTRESSBuilt for the trail. Checked for your truck.
Cart (0)
Home / Suspension & Lift Kits / Control Arms & Track Bars / Rough Country 10600
Rough CountryPart 10600 · UPC 00843030155865

High Steer Kit for Jeep Wrangler with 2.5-6in Lift

$119.95MAP price
In stock — 35 available
Shipping weight: 11 lb.
  • Fits 2007-2017 Jeep Wrangler (4WD and RWD) with 2.5-6in suspension lift kits
  • Must be used with the stock pitman arm — aftermarket drop pitman arms will not work
  • 3.5-4in of lift with a factory track bar; 3.5-6in with an adjustable track bar
  • Improves steering geometry and reduces bump steer; joints are greaseable

The Trail Fortress check

Will it fit your truck?

✓ Fits

2007–2017 Jeep Wrangler · 4WD/RWD
70th Anniversary75th AnniversaryRubiconSaharaSportSport SUnlimited 70th AnniversaryUnlimited 75th AnniversaryUnlimited RubiconUnlimited SaharaUnlimited SportUnlimited Sport SUnlimited XX

Fits models with 2.5 - 6in suspension lift kits. This kit MUST be used with a stock pitman arm Does NOT work with aftermarket drop pitman arms This kit can be used on Jeeps with 3.5"-4" of lift if equipped with a factory track bar. This kit can be used on Jeeps with 3.5"-6" of lift with Rough Country's forged adjustable track bar or similar aftermarket adjustable track bar. Fitment on this page is based on the manufacturer’s application data.

About this part

High Steer Kit, fitment-checked

A high steer kit for 2007-2017 Jeep Wrangler models running 2.5-6in of suspension lift, aimed at correcting the steering geometry a lift throws off and cutting bump steer. It must be run with the stock pitman arm — aftermarket drop pitman arms are incompatible. With a factory track bar the usable range is 3.5-4in of lift; with an adjustable track bar it extends to 3.5-6in.

Coverage is the 2007-2017 Jeep Wrangler in 4WD and RWD, across Sport, Sport S, Sahara, Rubicon, X, and the Unlimited versions of each. Raising a Wrangler tilts the steering linkage out of the plane it was designed to work in, and this kit repositions the connection to bring that geometry back and reduce bump steer. Two conditions govern the fit: the stock pitman arm has to stay on the vehicle, and the usable lift range depends on the track bar — 3.5-4in with the factory bar, or 3.5-6in with an adjustable one. The joints are greaseable.

Specifications

Specs

BrandRough Country
Part number10600
UPC / GTIN00843030155865
Shipping weight11 lb
Country of originTW
CategorySuspension & Lift Kits › Control Arms & Track Bars
Installation guideDownloadable PDF

Why buy here

The fitment-first store

Manufacturer-listed exclusions shown. We publish what a part does not fit — before you buy, not after the return.
Sourced from the application data. Fitment on this page comes from the manufacturer’s application catalog, not a copied listing.
Real install docs. The actual step-by-step guide, linked right on the page.