X-Flex Front Control Arms for Jeep Wrangler JL 4WD
- Fits 2018-2026 Jeep Wrangler 4WD, including Rubicon 392 and 4xe trims in the fitment table
- Recommended for Jeeps running 2.5 to 6in of lift
- Greaseable X-Flex ends; lower joints pivot up to 35 degrees
- Install time 3-4 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Recommended for models equipped with 2.5-6" of lift. Fitment on this page is based on the manufacturer’s application data.
About this part
X-Flex Front Control Arms, fitment-checked
X-Flex front control arms for the 2018-2026 Jeep Wrangler 4WD, recommended for Jeeps already sitting on 2.5 to 6in of lift. The flex ends take grease and the lower joints pivot through 35 degrees, so the axle can move without loading the arms sideways. Shipping weight: 27 lb.
These X-Flex arms take over the front position on 2018-2026 Wrangler 4WD models, from Sport through Rubicon 392 and the 4xe trims shown in the fitment list. They are meant for Jeeps carrying 2.5 to 6in of lift, where corrected geometry is the difference between a truck that tracks straight and one that wanders. Each lower joint articulates up to 35 degrees, and every joint takes grease, so the ends stay serviceable instead of becoming a replacement item. Budget 3-4 hours for the swap and work from the downloadable Rough Country installation guide.
Specifications
Specs
| Brand | Rough Country |
| Part number | 110601 |
| UPC / GTIN | 00843030149536 |
| Shipping weight | 27 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
| Installation guide | Downloadable PDF |
Why buy here