2-Inch N3 Leveling Strut Kit for Silverado and Sierra 1500
- Kit contents: one 2 Inch N3 loaded strut set with bolt retention plates
- Fits 2019–2025 Silverado 1500 and Sierra 1500 in 4WD and RWD, plus 2022 LTD and Limited
- Excludes AT4, AT4X, LT and Custom Trail Boss, ZR2, Denali, and Denali Ultimate
- Excludes diesel, Super Cruise, and LD trucks
- Downloadable installation guide available — shipping weight: 56.45 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
+ 1 more applications
✕ Does not fit
- Denali or Denali Ultimate models with
- AT4 models
- AT4X models
- LT Trail Boss or Custom Trail Boss models
- ZR2 models
- Diesel models
- Models equipped with Super Cruise
- LD models
About this kit
2-Inch N3 Leveling Strut Kit, fitment-checked
This kit boxes one 2 Inch N3 loaded strut set for the 2019–2025 Silverado 1500 and Sierra 1500, plus bolt retention plates to simplify the swap. Leveling the front to the rear is the point, with improved axle geometry as part of the design. It does not fit AT4, AT4X, Trail Boss, ZR2, Denali, Denali Ultimate, diesel, Super Cruise, or LD trucks.
A 2 Inch N3 loaded strut package for the 2019–2025 Chevrolet Silverado 1500 and GMC Sierra 1500, sold here as a kit that adds bolt retention plates to the strut assemblies. Fitment reaches WT through High Country on the Chevrolet side and Pro through SLT on the GMC side, in 4WD and RWD, and picks up the 2022 Silverado 1500 LTD and Sierra 1500 Limited. Factory-lifted and specialty trims sit outside it — AT4, AT4X, Trail Boss, ZR2, Denali, Denali Ultimate — as do diesel, Super Cruise, and LD trucks. A downloadable installation guide is available. Shipping weight: 56.45 lb.
What’s in the box
Kit contents
- 1× N3 Leveling Struts 501065$349.95
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 501065_A kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 501065_A |
| UPC / GTIN | 00840269941276 |
| Shock package | N3 series |
| Shipping weight | 56.45 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
1.75 Inch
1.5 Inch
1.5 Inch
2 Inch
2 Inch
2 Inch
2 Inch
2 Inch
1.5 Inch
1.5 Inch
2 Inch