6-Inch Lift Kit with M1 Struts for Ram 1500 4WD
- Fits 2012-2018 Ram 1500 4WD and 2019-2024 Ram 1500 Classic in listed trims
- M1 loaded strut pair up front with an M1 monotube shock pair and 6-inch dual-rate rear coils
- Lifted driver and passenger knuckles plus a front crossmember included
- Does not fit 3.6L Pentastar V6, four-corner air suspension (Rebel, Limited), or Warlock models
- Not recommended for AWD trucks due to pinion angle
- Requires 20-inch or larger wheels. Shipping weight: 263.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.6L Pentastar V6 engine
- Models with 4-Corner Air-Suspension found standard on Rebel and Limited models
- Warlock models
- 18" or smaller wheels
This package is an available upgrade across multiple sub-models. This kit is NOT recommended for AWD models due to pinion angle issues which cause drivetrain vibrations. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with M1 Struts, fitment-checked
A 6-inch lift kit for 2012-2018 Ram 1500 4WD and 2019-2024 Ram 1500 Classic, Rough Country 33240 runs an M1 loaded strut pair up front with an M1 monotube shock pair and 6-inch rear coil springs at the back. Driver and passenger knuckles and a front crossmember are included. Requires 20-inch or larger wheels; 18-inch wheels will not fit.
Front lift on this 6-inch Ram 1500 4WD kit comes from lifted knuckles and an M1 loaded strut pair, so the struts bolt in assembled, while dual-rate 6-inch rear coil springs and an M1 monotube pair set the back. Coverage spans 2012-2018 Ram 1500 and the 2019-2024 Ram 1500 Classic, from Tradesman through Laramie Longhorn. Three things rule a truck out: the 3.6L Pentastar V6, four-corner air suspension standard on Rebel and Limited, and Warlock trims with their 1-inch factory lift. AWD is not recommended because of pinion angle. Wheels must be 20 inches or larger.
What’s in the box
Kit contents
- 1× Dr Knuckle 1328BOX1
- 1× Ps Knuckle 1328BOX2
- 1× Crossmember Box Kit 1332BOX1
- 1× 6 In Strut Kit Box 332BOX6
- 1× M1 Loaded Strut Pair 502026
- 1× M1 MONOTUBE SHOCK PAIR 770744P
- 1× RR 6in Coil Springs 9424
- 1× 6" Kit Box 3320991
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 33240 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 33240 |
| UPC / GTIN | 00840269917325 |
| Lift height | 6 in |
| Shock package | M1 series |
| Shipping weight | 263 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here