High Steer Kit for Jeep Wrangler 4WD (2018-2025)
- High steer kit for the 2018-2025 Jeep Wrangler 4WD and 2020-2025 Gladiator 4WD
- Corrects steering geometry and takes out the bump steer a tall lift introduces
- Built from 1.5-inch DOM tubing with fully greaseable joints
- Fits models with 3.5 - 6in suspension lift kits
- Must be used with a stock pitman arm and a track bar relocation bracket
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits models with 3.5 - 6in suspension lift kits. This kit MUST be used with a stock pitman arm. MUST be used with track bar relocation bracket. If choosing "Drag Link Only" option please ensure your vehicle has a track bar relocation bracket. Does NOT work with aftermarket drop pitman arms This kit can be used on Jeeps with 3.5"-4" of lift if equipped with a factory track bar. This kit can be used on Jeeps with 4.5"-6" of lift with Rough Country's forged adjustable track bar or similar aftermarket adjustable track bar. Fitment on this page is based on the manufacturer’s application data.
About this part
High Steer Kit, fitment-checked
A high steer kit for the Jeep Wrangler 4WD, 2018-2025, and Gladiator 4WD, 2020-2025, built around 1.5-inch DOM tubing with greaseable joints. Raising the drag link connection corrects the steering angle a tall lift introduces, which is what takes bump steer out of the truck. Fits models with 3.5 - 6in suspension lift kits, must be run with a stock pitman arm, and must be used with a track bar relocation bracket.
Lift a Wrangler far enough and the drag link ends up running at an angle the steering was never designed around. The wheel starts pulling at every rut, which is bump steer, and no amount of alignment fixes it. This kit repositions the linkage so the geometry comes back into range, using 1.5-inch DOM tubing and joints you can grease rather than replace. Read the fitment before ordering: 3.5 - 6in lifts, a stock pitman arm, and a track bar relocation bracket are all required.
Specifications
Specs
| Brand | Rough Country |
| Part number | 10637 |
| UPC / GTIN | 00840269902116 |
| Shipping weight | 12 lb |
| Country of origin | TW |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
Why buy here
The fitment-first store
Keep looking
More Control Arms & Track Bars
