Coilover Conversion Kit with Vertex Coilovers for Ram 2500 4WD
- Fits compatible 2014-2026 Ram 2500 4WD models — see the full fitment list below
- Only for trucks with a 5 in Rough Country lift kit already installed; does not fit gas engine models
- Vertex 2.5 adjustable 8-step coilovers, left and right, plus V2 monotube secondary shocks
- Front components: (2) Vertex coilovers, (2) upper mounts, (2) lower mounts, (2) V2 monotube shocks, hardware
- Cutting and drilling required — install time listed at 6-8 hours, downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
Requires cutting and drilling for installation. ONLY fits models equipped with 5" Rough Country lift kit Installed. Fitment on this page is based on the manufacturer’s application data.
About this kit
Coilover Conversion Kit with Vertex Coilovers, fitment-checked
Rough Country 31014 is a front coilover conversion kit for compatible 2014-2026 Ram 2500 4WD models, built around a pair of Vertex 2.5 adjustable 8-step coilovers with left and right units. It fits only trucks already running a 5 in Rough Country lift kit, and it does not fit gas engine models. Cutting and drilling are part of the install.
This coilover conversion kit for the 2014-2026 Ram 2500 4WD replaces the front setup with Vertex 2.5 adjustable 8-step coilovers, adding ride-height adjustability and a secondary V2 monotube shock per side for extra damping. The box carries two coilovers, upper and lower fabricated mounts, the two monotube shocks, and hardware. Supported trims run from Tradesman and Big Horn through Laramie Longhorn, Rebel, Limited, and Special Service. Confirm your truck already has a 5 in Rough Country lift kit installed and a diesel engine before ordering, then work from the downloadable Rough Country installation guide.
What’s in the box
Kit contents
- 1× 5" Kit Box 31014991
- 1× Vertex 2.5 Adj 8-Step FR Left 5IN 680051L-2
- 1× Vertex 2.5 Adj 8-Step FR Right 5IN 680051R-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 31014 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 31014 |
| UPC / GTIN | 00840269921780 |
| Shock package | Vertex series |
| Shipping weight | 99.8 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here