5-Inch Radius Arm Lift Kit with N3 Shocks for 2019–2024 Ram 2500 4WD — Part 38330
- Fits 2019–2024 Ram 2500 4WD diesel models — review the full fitment list and exclusions first
- Does not fit Power Wagon or air-ride-equipped trucks
- N3 shocks front and rear, plus front and rear dual-rate coil springs, radius arms, and track bar bracket
- Transfer case removal for clocking ring install and minor cutting required — downloadable installation guide available
- Trucks with a two-piece driveshaft and carrier bearing, as on the Mega Cab, may see take-off vibration
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 'Power Wagon' models Does NOT fit air ride models
Requires removal of Transfer case for clocking ring install for correct front driveline geometry. ONLY fits Diesel models Requires minor cutting. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Radius Arm Lift Kit with N3 Shocks, fitment-checked
Rough Country 38330 is a 5-inch lift kit for 2019–2024 Ram 2500 4WD models with a diesel engine. The kit pairs replacement driver and passenger radius arms with front and rear dual-rate coil springs, a track bar bracket, a transfer case clocking ring, and two pairs of N3 shocks. It does not fit Power Wagon or air-ride models, and minor cutting is part of the job.
This 5-inch lift kit for the 2019–2024 Ram 2500 4WD covers Tradesman through Limited Longhorn trims, including Big Horn, Laramie, Lone Star, Rebel, and Special Service applications listed in the fitment section, and only diesel-engine trucks qualify. Front and rear dual-rate coils raise the truck while the radius arms hold a closer-to-factory arm angle on rubber bushings, and the track bar bracket keeps the front axle centered. The transfer case comes out so the clocking ring can be fitted for front driveline geometry, and minor cutting is required. A downloadable Rough Country installation guide is available before you start.
What’s in the box
Kit contents
- 1× Driver Radius Arm 1368996
- 1× FR Box Kit 36030BOX1
- 1× RR Coil Spring Box Kit 368BOX1
- 1× FR 5" Dual Rate 9414
- 1× RR 5" Dual Rate 9415
- 1× Transfer Case Clocking Ring Box Kit 36030BOX5
- 1× N3 Shock Pair 23297
- 1× N3 Shock Pair 23207
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 38330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 38330 |
| UPC / GTIN | 00843030190354 |
| Lift height | 5 in |
| Shock package | N3 series |
| Shipping weight | 333.53 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here