Adjustable Front Track Bar for Jeep Wrangler & Cherokee
- Fits 1984–2001 Jeep Cherokee and 1997–2006 Wrangler — full trim list below
- Recommended for models with 1.5in to 4.5in suspension lift kits
- 1.25in outside diameter tube with 0.25in wall and an oversized tie rod end
- Adjustable length re-centers the front axle after a lift
- Install time 2-3 hours; downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Recommended for models with 1.5in - 4.5in suspension lift kits. Fitment on this page is based on the manufacturer’s application data.
About this part
Adjustable Front Track Bar, fitment-checked
An adjustable front track bar for the 1997–2006 Jeep Wrangler and 1984–2001 Cherokee, aimed at builds running 1.5in to 4.5in of lift. Lift shifts the front axle off center; adjusting the bar length brings it back. The tube is 1.25in outside diameter with 0.25in wall thickness, and the tie rod end is larger than the factory piece. Bolt-on installation. Rough Country 7572.
Rough Country lists this bar for 1.5in to 4.5in lift kits on the 1984–2001 Cherokee and the 1997–2006 Wrangler, covering Sport, Sahara, Rubicon, X and Unlimited variants along with Cherokee Laredo, Country, Pioneer and Classic trims. The build is heavy-wall: 1.25in outside diameter tubing at 0.25in wall, an oversized tie rod end, and an OEM-style rubber bushing at the frame. Length is adjustable, which is the point — you set the axle back on center after the lift moved it. Budget 2-3 hours and work from the downloadable installation guide.
Specifications
Specs
| Brand | Rough Country |
| Part number | 7572 |
| UPC / GTIN | 00843030114169 |
| Shipping weight | 10 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
| Installation guide | Downloadable PDF |
Why buy here