Adjustable Front Track Bar for Jeep Wrangler (2007–2017)
- Fits 2007–2017 Jeep Wrangler 4WD and RWD models running 2.5 to 6in of suspension lift
- Forged solid steel bar, 1.25in outside diameter, with OEM-style rubber bushings
- Adjusts while mounted on the Jeep to re-center the front axle
- Requires track bar drop bracket 1118 if a drop pitman arm is installed
- Install time: 1-2 hours. Downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits models with 2.5 - 6in suspension lift kits. Models with a drop pitman arm installed require a track bar drop bracket (# 1118). Available Below. Fitment on this page is based on the manufacturer’s application data.
About this part
Adjustable Front Track Bar, fitment-checked
Rough Country 1179 pulls the front axle back to center on 2007–2017 Jeep Wrangler models carrying 2.5 to 6in of suspension lift. The bar is forged from solid steel at 1.25in outside diameter, rides on OEM-style rubber bushings, and can be adjusted with the bar still bolted to the Jeep. If a drop pitman arm is already installed, a separate track bar drop bracket (part 1118) is required.
Coverage runs across the 2007–2017 Wrangler line (Sport, Sport S, Sahara, Rubicon, X, the anniversary editions, and their Unlimited counterparts) in both 4WD and RWD. Lift a Jeep and the factory bar leaves the axle sitting off-center; this one is adjustable in place, so the axle can be dialed in without dropping the bar. Plan on 1-2 hours in the driveway. Check whether a drop pitman arm is in the mix first, since that combination calls for the drop bracket. The downloadable Rough Country installation guide walks through the sequence.
Specifications
Specs
| Brand | Rough Country |
| Part number | 1179 |
| UPC / GTIN | 00843030101732 |
| Shipping weight | 17 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
Why buy here
The fitment-first store
Keep looking
More Control Arms & Track Bars
