5-Inch Lift Kit with V2 Shocks for 2014–2018 Ram 2500 4WD
- Fits 2014–2018 Ram 2500 4WD across Tradesman, SLT, Big Horn, Lone Star, Outdoorsman, Laramie, Laramie Longhorn, Laramie Limited, and Limited
- Does not fit Power Wagon models or diesel engine models
- Compatible with rear coil spring and rear air ride suspensions; rear brackets allow up to 1-inch of rear ride height adjustment on air ride only
- Kit contents: two V2 monotube shock pairs, driver and passenger radius arms, 5in gas coils, front and rear box kits
- Drilling and cutting required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- "Power Wagon" models
- Diesel engine models
Requires drilling and cutting. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 37370 is a 5-inch lift kit for the 2014–2018 Ram 2500 4WD, built around V2 series monotube shocks, driver and passenger radius arms, front gas coils, and front and rear box kits. It works with both rear coil spring and rear air ride setups. It does not fit Power Wagon models or diesel engine models, and installation calls for drilling and cutting.
This 5-inch lift kit for the 2014–2018 Ram 2500 4WD ships as a full package: two V2 monotube shock pairs valved for the application, driver and passenger radius arms with rubber bushings for a closer-to-factory arm angle, front gas coils, and front and rear box kits with a track bar bracket that keeps the front axle centered. Rear ride height brackets allow the rear to sit up to 1-inch above the front on air ride models only. Drilling and cutting are required; Mega Cab trucks with a two piece driveshaft and carrier bearing may show take-off vibration that shimming can address. Use the downloadable installation guide to plan the job.
What’s in the box
Kit contents
- 1× Driver Radius Arm 1368996
- 1× FR Box Kit 1373BOX1
- 1× RR Box Kit 1368BOX5
- 1× V2 MONOTUBE SHOCK PAIR 760818
- 1× 5in Gas Coils 9216
- 1× V2 MONOTUBE SHOCK PAIR 760801
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 37370 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 37370 |
| UPC / GTIN | 00843030199999 |
| Lift height | 5 in |
| Shipping weight | 237 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here