4 Inch Lift CV Drive Shaft for Jeep Wrangler YJ 4WD
- Fits 1994–1995 Jeep Wrangler YJ 4WD at 4 in of lift
- Slip yoke eliminator required
- 16.75 in collapsed, 20.25 in extended
- Ford F-250 and F-350 Super Duty 4WD applications also appear in the fitment table
- Install time 2-3 hours; downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
A Slip Yoke Eliminator is REQUIRED. Recommended on YJ models with 4in of lift. Fitment on this page is based on the manufacturer’s application data.
About this kit
4 Inch Lift CV Drive Shaft, fitment-checked
Rough Country 5087.1 is a CV drive shaft for 1994–1995 Jeep Wrangler YJ 4WD at 4 in of lift, measuring 16.75 in collapsed and 20.25 in extended. A slip yoke eliminator is required. Ford F-250 and F-350 Super Duty 4WD applications also appear in the fitment table.
Sized for the YJ Wrangler at 4 in of lift, this shaft measures 16.75 in collapsed and 20.25 in extended — a short shaft, and worth measuring against your current one before you commit. It uses upgraded cardan joints and is rated at twice the strength of the factory shaft, which matters most at the steeper angles a lift creates. A slip yoke eliminator is required. Ford F-250 and F-350 Super Duty 4WD applications also appear in the fitment table for this part number. Install time is 2 to 3 hours with the downloadable guide.
Specifications
Specs
| Brand | Rough Country |
| Part number | 5087.1 |
| UPC / GTIN | 00843030110581 |
| Lift height | 4 in |
| Shipping weight | 16 lb |
| Country of origin | US |
| Category | Performance › Drivetrain |
| Installation guide | Downloadable PDF |
Why buy here