Front CV Drive Shaft for Jeep Wrangler JK 4WD (2007–2011)
- Fits 2007–2011 Jeep Wrangler JK 4WD with Dana 30 or Dana 44 front axles
- For 3.5 in to 6 in of lift
- Clears stock shaft-to-oil-pan contact on automatic transmission models
- 33.75 in collapsed, 37.25 in extended
- Install time 2-3 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
ONLY fits Dana 30 and 44 front axle models. Recommended on models with 3.5in - 6in of lift. Fitment on this page is based on the manufacturer’s application data.
About this part
Front CV Drive Shaft, fitment-checked
A front CV drive shaft for 2007–2011 Jeep Wrangler JK 4WD models with Dana 30 or Dana 44 front axles, on 3.5 in to 6 in of lift. It measures 33.75 in collapsed and 37.25 in extended and clears the stock shaft-to-oil-pan contact seen on automatic transmission models.
Front-shaft duty on the JK: this one covers 2007–2011 Wrangler 4WD models with Dana 30 or Dana 44 front axles, on 3.5 in to 6 in of lift. It measures 33.75 in collapsed and 37.25 in extended and clears the stock shaft-to-oil-pan contact that turns up on automatic transmission models. Brute Force red seals protect upgraded cardan joints, and the shaft is rated at twice factory strength. Grease fittings sit clear of the transmission pan. Confirm your front axle before ordering, allow 2 to 3 hours, and use the downloadable installation guide.
Specifications
Specs
| Brand | Rough Country |
| Part number | 5095.1 |
| UPC / GTIN | 00843030110604 |
| Shipping weight | 27 lb |
| Country of origin | CN |
| Category | Performance › Drivetrain |
Why buy here
The fitment-first store
Keep looking
More Drivetrain
4 Inch
6 Inch
