CV Drive Shaft with 1350 CV Head for Jeep Wrangler TJ Rubicon
- 2003–2006 Jeep Wrangler TJ Rubicon 4WD only
- 1350 CV head; flexes to a nominal 30 degrees before binding
- Bolts in without removing the factory dampener hub
- 16.875 in collapsed, 20.125 in extended; for 4 in to 6 in of lift
- Install time 2-3 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
ONLY fits 03-06 Rubicon models. Recommended on models with 4in - 6in of lift. Fitment on this page is based on the manufacturer’s application data.
About this part
CV Drive Shaft with 1350 CV Head, fitment-checked
Built for 2003–2006 Jeep Wrangler TJ Rubicon 4WD models only, this CV drive shaft carries a 1350 CV head, flexes to a nominal 30 degrees before binding, and bolts in without removing the factory dampener hub. It measures 16.875 in collapsed and 20.125 in extended, and suits 4 in to 6 in of lift.
The Rubicon TJ gets its own shaft here, and it goes in without pulling the factory output-side vibration dampener hub. It flexes to a nominal 30 degrees before binding, carries a 1350 CV head, and measures 16.875 in collapsed and 20.125 in extended. Coverage is 2003–2006 Rubicon models only, aimed at builds with 4 in to 6 in of lift. The grease fittings sit away from the transmission pan, which makes routine service less of a chore. Figure 2 to 3 hours in the driveway and download the installation guide first.
Specifications
Specs
| Brand | Rough Country |
| Part number | 5088.1 |
| UPC / GTIN | 00843030110598 |
| Shipping weight | 22 lb |
| Country of origin | US |
| Category | Performance › Drivetrain |
Why buy here
The fitment-first store
Keep looking
More Drivetrain
4 Inch
6 Inch
