2.5-Inch Lift Kit for 1997-2006 Jeep Wrangler 4WD (SE)
- Fits 1997-2006 Jeep Wrangler 4WD SE — does not fit 6-cylinder models
- Bolt-on installation: no welding or custom fabrication called for
- Coil springs matched to the factory spring rate
- Shock choice between nitrogen-charged N3 and M1 Monotube
- Aftermarket wheels recommended — stock wheels with oversized tires can contact the lower control arm at full turn
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with 6cyl engine
The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn. Aftermarket wheels are recommended. Fitment on this page is based on the manufacturer’s application data.
About this part
2.5-Inch Lift Kit, fitment-checked
Rough Country 652 is a 2.5-inch lift kit for the 1997-2006 Jeep Wrangler 4WD in SE trim. It bolts on without welding or custom fabrication and uses coil springs matched to the factory spring rate. It does not fit Wranglers with the 6-cylinder engine, and aftermarket wheels are recommended when running oversized tires.
This 2.5-inch lift kit for the 1997-2006 Jeep Wrangler 4WD adds ground clearance and room for larger wheel and tire packages on SE models. Confirm your engine first: applications with the 6-cylinder are excluded. Coil springs are tuned to the stock rate, so ride quality stays predictable, and the kit installs with bolt-on hardware rather than welding or cutting. Keeping factory wheels with taller tires can bring the tire into contact with the lower control arm at full lock, so aftermarket wheels are the safer route. N3 nitrogen-charged or M1 Monotube shock options are offered. A downloadable installation guide is available.
Specifications
Specs
| Brand | Rough Country |
| Part number | 652 |
| UPC / GTIN | 00843030111700 |
| Lift height | 2.5 in |
| Shipping weight | 48 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here