4-Inch Lift Kit with V2 Shocks for Wrangler Unlimited (2007–2017)
- Fits 2007–2017 Jeep Wrangler Unlimited four-door models — 2-door Wranglers are not covered
- Two V2 monotube shock pairs, forged adjustable front track bar (2.5-6 inch lift), X-Flex adjustable control arms, and rear coil correction plates
- Rear correction plates reset coil spring angle by 10 degrees for corrected suspension geometry
- 2012-2018 models require exhaust modification to clear the front driveshaft; automatic-equipped Jeeps may need a smaller-diameter shaft (SKU 1030)
- Bolt-on install with no cutting called for — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 2-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 67470 is a 4-inch lift kit for 2007–2017 Jeep Wrangler Unlimited four-door models, built around two pairs of V2 monotube shocks, a forged adjustable front track bar rated for 2.5-6 inches of lift, X-Flex adjustable control arms, and rear coil correction plates. It does not fit 2-door Wranglers.
This 4-inch lift kit for the 2007–2017 Jeep Wrangler Unlimited ships as a bolt-on package: no cutting is called for, and the front-to-rear stance is leveled as ride height goes up. The forged front track bar keeps the axle centered across a 2.5-6 inch lift range, the rear correction plates reset the coil angle by 10 degrees, and the X-Flex arms use a 2.5" body with 1.25" threads and greasable, rebuildable joints. Two-door models are excluded, and 2012-2018 Wranglers need exhaust modification for front driveshaft clearance. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 674 Kit Box 674BOX1
- 1× Track Bar 1179
- 1× Adj Arm Kit Box 1673XBOX3
- 1× Kit Box 1673XBOX4
- 1× V2 MONOTUBE SHOCK PAIR 760750-2
- 1× V2 MONOTUBE SHOCK PAIR 760740-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 67470 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 67470 |
| UPC / GTIN | 00843030171223 |
| Lift height | 4 in |
| Shipping weight | 182.82 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here