4-Inch Lift Kit with M1R Shocks for 2007-2017 Jeep Wrangler 4WD
- Fits 2007-2017 Jeep Wrangler 4WD two-door — X, Sport, Sport S, Sahara, Rubicon, 70th and 75th Anniversary
- Does not fit 4-door models; 2012-2018 applications require exhaust modification for front driveshaft clearance
- Includes two M1R monotube reservoir shock pairs, X-Flex adjustable control arms, and rear coil correction plates (10 degrees)
- Forged adjustable front track bar covers 2.5-6 inch lift heights for axle centering
- Bolt-on installation with no cutting; downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 67344 is a 4-inch lift kit for the 2007-2017 Jeep Wrangler 4WD in two-door form, built around two pairs of M1R monotube reservoir shocks, X-Flex adjustable control arms, rear coil correction plates, and a forged adjustable front track bar. Four-door Wrangler Unlimited models are not covered.
This 4-inch lift kit for the 2007-2017 Jeep Wrangler 4WD covers X, Sport, Sport S, Sahara, Rubicon, and the 70th and 75th Anniversary trims listed in the fitment section. It bolts on without cutting, and the box carries a forged front track bar rated for 2.5-6 inch lift heights, X-Flex arms with a 2.5 in body and 1.25 in threads, coil correction plates that reset rear spring angle by 10 degrees, and two M1R monotube reservoir shock pairs. Four-door models are excluded, and 2012-2018 applications call for exhaust modification for front driveshaft clearance. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Track Bar 1179
- 1× Adj Arm Kit Box 1673XBOX3
- 1× Kit Box 1673XBOX4
- 1× 673 Kit Box 673BOX1
- 1× M1R MONOTUBE RESI SHOCK PAIR 770740RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770750RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 67344 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 67344 |
| UPC / GTIN | 00840269975158 |
| Lift height | 4 in |
| Shipping weight | 185.3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here