2.5-Inch Vertex Lift Kit for Jeep Wrangler JL 4WD (2018-2023)
- Fits 4-door 2018-2023 Jeep Wrangler JL 4WD, including Unlimited Rubicon - choose Rubicon or non-Rubicon coils to match your spring rate
- Not compatible with 3.0L EcoDiesel V6, 392, or 4xe models
- Kit contents: 2.5-3.5 inch coil springs plus two V2 monotube shock pairs
- Bolt-on installation with no cutting or welding - downloadable installation guide available
- 35-inch tires clear, but check front tire, lower control arm, and sway-bar link spacing on factory wheels
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 4-door models ONLY. To ensure proper fitment please select whether your vehicle is a Rubicon or non-Rubicon using the dropdown above as coil spring rates vary between models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Vertex Lift Kit, fitment-checked
Rough Country 67770 is a 2.5-inch Vertex lift kit for 4-door 2018-2023 Jeep Wrangler JL 4WD models, shipping with 2.5-3.5 inch coils and two pairs of V2 monotube shocks. Spring rates differ between Rubicon and non-Rubicon, so confirm your trim before ordering. It does not fit 3.0L EcoDiesel V6, 392, or 4xe models.
This 2.5-inch Vertex lift kit for the 2018-2023 Jeep Wrangler JL 4WD is a bolt-on package built around coil springs matched to factory spring rates, with V2 monotube shocks front and rear. It levels the front end against the rear and adds ride height for clearance on rough terrain. Fitment is limited to 4-door models, and the 3.0L EcoDiesel V6, 392, and 4xe variants are excluded. Tires up to 35 inches will clear, though contact is possible under full articulation. A downloadable Rough Country installation guide is available before you start.
What’s in the box
Kit contents
- 1× 2.5in Vertex Kit Box 67750BOX1
- 1× 2.5-3.5 Inch Coils 1677BOX3
- 1× V2 MONOTUBE SHOCK PAIR 760808-2
- 1× V2 MONOTUBE SHOCK PAIR 760809-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 67770 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 67770 |
| UPC / GTIN | 00843030198527 |
| Shock package | Vertex series |
| Shipping weight | 84.07 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch