2.5-Inch Lift Kit with M1 Shocks for Jeep Wrangler 4WD (2024-2026) — Part 79340
- Fits 2024-2026 Jeep Wrangler 4WD four-door models only
- Not compatible with Rubicon, 4xe, or 392 configurations due to coil spring rate differences
- Kit contents: coil springs plus front and rear M1 Monotube shock pairs
- Clears 35 inch tires; verify front tire, lower control arm, and sway-bar link clearance on factory wheels
- Bolt-on install with no cutting or welding — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with M1 Shocks, fitment-checked
Rough Country 79340 is a 2.5 inch lift kit for 2024-2026 Jeep Wrangler 4WD four-door models, built around coil springs and M1 Monotube shock pairs for both ends. Coil spring rate differences mean it is not a fit for Rubicon, 4xe, or 392 configurations. Bolt-on installation with no cutting or welding, and a downloadable installation guide is available.
This 2.5 inch lift kit for the 2024-2026 Jeep Wrangler 4WD fits four-door models only, and the box holds coil springs along with M1 Monotube shock pairs for the front and the rear. Because of coil spring rate differences, it does not cover Rubicon, 4xe, or 392 configurations, so match your trim to the fitment list before ordering. Installation is bolt-on, with no cutting or welding called for. Tires measuring 35 inches clear, though rubbing can appear under extreme articulation; on factory wheels, check the space between the front tire, lower control arm, and sway-bar links. Shipping weight: 83 lb.
What’s in the box
Kit contents
- 1× 2.5-3.5 Inch Coils 1677BOX3
- 1× 2.5in Vertex Kit Box 79350991
- 1× M1 MONOTUBE SHOCK PAIR 770808P
- 1× M1 MONOTUBE SHOCK PAIR 770809P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79340 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79340 |
| UPC / GTIN | 00840269945519 |
| Lift height | 2.5 in |
| Shock package | M1 series |
| Shipping weight | 83 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here