2.5-Inch Lift Kit with M1R Shocks for Jeep Wrangler 4WD (2024–2026)
- Fits 2024–2026 Jeep Wrangler 4WD four-door models only — see the fitment list for supported submodels
- Not compatible with Rubicon, 4xe, or 392 models due to coil spring rate differences
- Kit contents: 2.5–3.5 inch coil springs, Vertex kit box hardware, and two M1R monotube reservoir shock pairs
- 35-inch tires clear, but verify front tire, lower control arm, and sway-bar link spacing on factory wheels
- Bolt-on installation with no cutting or welding — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 79344 is a 2.5-inch lift kit for 2024–2026 Jeep Wrangler 4WD four-door models, built around Vertex-boxed coil springs and two pairs of M1R monotube reservoir shocks. It fits four-door Wranglers only and is not matched to Rubicon, 4xe, or 392 spring rates. Confirm your submodel in the fitment list before ordering.
This 2.5-inch lift kit for the 2024–2026 Jeep Wrangler 4WD covers Sport, Sport S, Sahara, Willys, Unlimited Sahara, and Unlimited Willys four-door applications listed in the fitment section. The package pairs coil springs tuned close to factory rates with two M1R monotube reservoir shock pairs, so the front end comes up to meet the rear and the ride stays predictable. Assembly bolts on without cutting or welding. Tires measuring 35 inches will clear, though contact can show up under full articulation — check spacing at the front tire, lower control arm, and sway-bar links if you run factory wheels. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2.5-3.5 Inch Coils 1677BOX3
- 1× 2.5in Vertex Kit Box 79350991
- 1× M1R MONOTUBE RESI SHOCK PAIR 770808RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770809RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79344 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79344 |
| UPC / GTIN | 00840269974922 |
| Lift height | 2.5 in |
| Shipping weight | 83 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here