2.5-Inch Lift Kit with V2 Shocks for 2024-2026 Jeep Wrangler 4WD
- Fits supported 4-door 2024-2026 Jeep Wrangler 4WD models — see the full fitment list
- Does not fit Rubicon, 4xe, or 392 models due to coil spring rate differences
- Kit contents: Vertex kit box, 2.5-3.5 inch coils, and two V2 monotube shock pairs
- Bolt-on install with no cutting or welding — downloadable installation guide available
- Clears 35-inch tires; verify front tire, lower control arm, and sway-bar link clearance on factory wheels
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 79370 is a 2.5-inch lift kit for supported 2024-2026 Jeep Wrangler 4WD models, built around a Vertex kit box, coil springs, and two pairs of V2 monotube shocks. It fits 4-door bodies only, and spring-rate differences rule out Rubicon, 4xe, and 392 models. Tires up to 35 inches clear, though contact is possible under heavy articulation.
This 2.5-inch lift kit for the 2024-2026 Jeep Wrangler 4WD ships as a Vertex-boxed package: front and rear coil springs plus two V2 monotube shock pairs. The design bolts on without cutting or welding, and the springs are rate-matched to factory pieces so ride quality stays close to stock while the front end comes up level with the rear. Check the exclusions first — 4-door bodies only, and no Rubicon, 4xe, or 392. If you plan on 35-inch tires with factory wheels, measure clearance at the front tire, lower control arm, and sway-bar links. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2.5in Vertex Kit Box 79350991
- 1× 2.5-3.5 Inch Coils 1677BOX3
- 1× V2 MONOTUBE SHOCK PAIR 760808-2
- 1× V2 MONOTUBE SHOCK PAIR 760809-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79370 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79370 |
| UPC / GTIN | 00840269945526 |
| Lift height | 2.5 in |
| Shipping weight | 80 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here