2.5-Inch Lift Kit with V2 Shocks for Jeep Wrangler 4WD (2024-2026)
- Fits 2024-2026 Jeep Wrangler 4WD Sport, Sport S, Willys, and Willys Sport — 2-door bodies only
- Does not fit Rubicon, 4xe, or 392 models due to coil spring rate differences
- Kit contents: Vertex kit box, 2-door 2.5in coils, and two V2 Monotube shock pairs
- Bolt-on install with no cutting or welding; downloadable installation guide available
- Clears up to 35-inch tires — verify front tire, lower control arm, and sway-bar link clearance on factory wheels
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 2-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 79670 is a 2.5-inch lift kit for 2024-2026 Jeep Wrangler 4WD in Sport, Sport S, Willys, and Willys Sport trims. The kit pairs Vertex-series hardware with two V2 Monotube shock pairs and 2-door coil springs. It fits 2-door bodies only, and coil spring rate differences rule out Rubicon, 4xe, and 392 models.
This 2.5-inch lift kit for the 2024-2026 Jeep Wrangler 4WD ships as a Vertex kit box with a 2-door coil set and two V2 Monotube shock pairs, so front and rear damping arrive matched to the new ride height. It bolts on without cutting or welding and levels the front end against the factory rake. Tires up to 35 inches will clear, though rubbing is possible under heavy articulation — on factory wheels, check spacing between the front tire, lower control arm, and sway-bar links first. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2.5in Vertex Kit Box 79350991
- 1× 2-Door 2.5in Coils 91330BOX2
- 1× V2 MONOTUBE SHOCK PAIR 760808-2
- 1× V2 MONOTUBE SHOCK PAIR 760809-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79670 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79670 |
| UPC / GTIN | 00840269945540 |
| Lift height | 2.5 in |
| Shipping weight | 71 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here