2.5-Inch Lift Kit with M1 Shocks for Jeep Wrangler 4WD (2024-2025)
- Fits 2024-2025 Jeep Wrangler 4WD, four-door Rubicon only — 4xe and 392 models are not covered
- Kit contents: 2.5-inch coil springs, Vertex kit box hardware, and two M1 Monotube shock pairs
- Bolt-on installation with no cutting or welding — downloadable installation guide available
- Clears 35-inch tires; extreme articulation may still cause rubbing, so check factory-wheel clearance
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with M1 Shocks, fitment-checked
Rough Country 79740 is a 2.5-inch lift kit for the 2024-2025 Jeep Wrangler 4WD, built around Vertex-boxed 2.5-inch coil springs and two pairs of M1 Monotube shocks. Coil spring rates limit it to four-door Rubicon models; 4xe and 392 versions are not covered. Bolt-on install with no cutting or welding.
This 2.5 inch lift kit for the 2024-2025 Jeep Wrangler 4WD fits four-door Rubicon models only, and coil spring rate differences rule out 4xe and 392 versions, so confirm your trim against the fitment list before ordering. The box holds 2.5-inch coil springs matched to factory spring rates plus two M1 Monotube shock pairs, and everything bolts on without cutting or welding. Tires measuring 35 inches will clear, though rubbing can show up under extreme articulation; on factory wheels, check the space between the front tire, lower control arm, and sway-bar links. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2.5in Coils 66630BOX1
- 1× 2.5in Vertex Kit Box 79350991
- 1× M1 MONOTUBE SHOCK PAIR 770808P
- 1× M1 MONOTUBE SHOCK PAIR 770809P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79740 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79740 |
| UPC / GTIN | 00840269945564 |
| Lift height | 2.5 in |
| Shock package | M1 series |
| Shipping weight | 86 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch