2.5-Inch Lift Kit with M1R Shocks for Jeep Wrangler Rubicon 4WD
- Fits 2024-2026 Jeep Wrangler Rubicon, Rubicon X, and Unlimited Rubicon 4WD — four-door models only
- Does not fit 4xe or 392 models due to coil spring rate differences
- Kit contents: 2.5-inch coil springs plus two M1R monotube reservoir shock pairs in a Vertex kit box
- Clears tires up to 35 inches; verify factory-wheel clearance at the control arm and sway-bar links
- Bolt-on install with no cutting or welding — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models. 35" tires will clear but rubbing may occur with extreme articulation. If planning on running 35" tires on factory wheels double-check clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 79744 is a 2.5-inch lift kit for 2024-2026 Jeep Wrangler Rubicon 4WD models, built around two pairs of M1R monotube reservoir shocks and matched coil springs. Four-door Rubicon models only: it does not fit 4xe or 392 versions because of coil spring rate differences. Bolt-on installation with no cutting or welding called for in the feed facts.
This 2.5-inch lift kit for the 2024-2026 Jeep Wrangler Rubicon 4WD ships as a Vertex-series kit box with 2.5-inch coil springs and two M1R monotube reservoir shock pairs, covering Rubicon, Rubicon X, and Unlimited Rubicon submodels. Fitment is limited to four-door Rubicons; 4xe and 392 models fall outside the spring-rate range. Tires up to 35 inches will clear, though rubbing can show up under heavy articulation, so check front tire, lower control arm, and sway-bar link spacing if you keep factory wheels. A downloadable installation guide is available before you start.
What’s in the box
Kit contents
- 1× 2.5in Coils 66630BOX1
- 1× 2.5in Vertex Kit Box 79350991
- 1× M1R MONOTUBE RESI SHOCK PAIR 770808RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770809RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79744 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79744 |
| UPC / GTIN | 00840269975035 |
| Lift height | 2.5 in |
| Shipping weight | 86 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here