2-Inch Lift Kit for 1997–2006 Jeep Wrangler 4WD — Part 658
- Fits 1997–2006 Jeep Wrangler 4WD — SE, Sport, Sahara, X, Rubicon, Unlimited, Unlimited Rubicon, 65th Anniversary Edition
- Bolt-on installation — no cutting or welding required
- Oversized tires on stock wheels may contact the lower control arm at full turn; aftermarket wheels recommended
- Shock configuration options include nitrogen-charged N3 and M1 Monotube
- Downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn. Aftermarket wheels are recommended. Fitment on this page is based on the manufacturer’s application data.
About this part
2-Inch Lift Kit, fitment-checked
Rough Country 658 is a 2-inch lift kit for 1997–2006 Jeep Wrangler 4WD models, including SE, Sport, Sahara, X, Rubicon, Unlimited, Unlimited Rubicon, and the 65th Anniversary Edition. It bolts on without cutting or welding, and shock choices can be configured with nitrogen-charged N3 or M1 Monotube units.
This 2-inch lift kit for the 1997–2006 Jeep Wrangler 4WD raises ride height for larger tires and additional clearance over rocks and ruts, while bringing the front closer to level with the rear. Installation is bolt-on with no cutting or welding called for. One caution from the fitment data: running oversized tires on factory wheels can let the tire touch the lower control arm at full lock, so aftermarket wheels are the recommended pairing. A downloadable Rough Country installation guide is available to walk through the job before you start. Shipping weight: 14.0 lb.
Specifications
Specs
| Brand | Rough Country |
| Part number | 658 |
| UPC / GTIN | 00843030112295 |
| Lift height | 2 in |
| Shipping weight | 14 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here