3.5-Inch Lift Kit for 2018-2023 Jeep Wrangler JL 4WD (2-Door)
- Fits 2-door 2018-2023 Jeep Wrangler JL 4WD only — four-door models are not covered
- Does not fit Rubicon models or Jeeps equipped with the 3.0L EcoDiesel V6
- Kit contents: forged front track bar (2.5-6 inch lift), 2.5-3.5 inch coils, and the Stage 1 arm drop bracket box
- Bolt-on install with no cutting or welding; forged track bar uses a 1.25-inch outer diameter tube with OEM-style rubber bushings
- Aftermarket front CV driveshaft strongly recommended on any JL lift of 3.5 inches or taller (Rough Country SKU 5090.1A)
- Install time 4-6 hours; downloadable installation guide available. Shipping weight: 126.69 lb
Check tire fit for this kit → The manufacturer publishes 3 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 2-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep JL lift kit 3.5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country's Jeep JL Front CV Driveshaft SKU: 5090.1A found HERE. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit, fitment-checked
Rough Country 62930 is a 3.5-inch lift kit for 2-door 2018-2023 Jeep Wrangler JL 4WD models, including Sport, Sport S, Willys, Willys Sport, Freedom, Islander, and 80th Anniversary. It bolts on with no cutting or welding. It does not fit Rubicon models or Jeeps with the 3.0L EcoDiesel V6, and Rough Country recommends its Jeep JL Front CV Driveshaft (SKU 5090.1A) with any JL lift of 3.5 inches or more.
This 3.5-inch lift kit for the 2-door 2018-2023 Jeep Wrangler JL 4WD ships as three boxes: a forged front track bar rated for 2.5-6 inches of lift, a set of 2.5-3.5 inch coil springs, and the Stage 1 control arm drop bracket box. Front and rear hardware covers lifted coils, sway bar links, bump stops, and a rear track bar bracket, so axle centering and suspension angles stay in range. Listed install time is 4-6 hours, and a downloadable installation guide is available. Confirm the exclusions before ordering.
What’s in the box
Kit contents
- 1× Track Bar 11061$169.95
- 1× 2.5-3.5 Inch Coils 1677BOX3
- 1× 3.5in 2-Door Stage 1 Arm Drop Kit Box 62930BOX1
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 62930 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 62930 |
| UPC / GTIN | 00843030175412 |
| Lift height | 3.5 in |
| Shipping weight | 126.69 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch