3.5-Inch Lift Kit with V2 Shocks for Jeep Wrangler JL (2018–2023)
- Fits supported 2018–2023 Jeep Wrangler JL 4WD, 4-door models only — review the full submodel list below
- Does not fit Rubicon, 392, 4xe, or 3.0L EcoDiesel V6 models
- Kit contents: 3.5-inch Stage 1 arm drop bracket box, 3.5-inch coils, and two V2 monotube shock pairs
- Forged track bar with 1.25-inch outer diameter and rear track bar bracket for axle centering
- Aftermarket front CV driveshaft strongly recommended at 3.5 inches of lift (Rough Country 5090.1A)
- Bolt-on install, no cutting or welding — downloadable installation guide available; shipping weight: 122.07 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models. An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep JL lift kit 3.5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country's Jeep JL Front CV Driveshaft SKU: 5090.1A found HERE. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 66870 is a 3.5-inch lift kit for supported 2018–2023 Jeep Wrangler JL 4WD models, built around a Stage 1 control arm drop bracket kit, matched coil springs, and two pairs of V2 monotube shocks. It covers 4-door models only, and it is not for Rubicon, 392, 4xe, or 3.0L EcoDiesel V6 applications.
This 3.5-inch lift kit for the 2018–2023 Jeep Wrangler JL 4WD ships as a four-box kit: the 3.5-inch Stage 1 arm drop bracket box, 3.5-inch coil springs, and two V2 monotube shock pairs for front and rear. Drop brackets hold factory control arm angles, and a forged track bar with 1.25-inch outer diameter keeps the front axle centered. Rough Country recommends an aftermarket front CV driveshaft on any JL lift of 3.5 inches or more, since a factory shaft can be damaged at full droop. A downloadable installation guide is available. Shipping weight: 122.07 lb.
What’s in the box
Kit contents
- 1× 3.5in Stage 1 Arm Drop Kit Box 66830BOX2
- 1× 3.5in Coils 67830BOX1
- 1× V2 MONOTUBE SHOCK PAIR 760807
- 1× V2 MONOTUBE SHOCK PAIR 760808-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 66870 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 66870 |
| UPC / GTIN | 00843030185763 |
| Lift height | 3.5 in |
| Shipping weight | 122.07 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here