3.5-Inch Lift Kit for Jeep Wrangler JK 4WD (2007-2017)
- Fits 2007-2017 Jeep Wrangler JK 4WD two-door — Sport, Sport S, X, Sahara, Rubicon, 70th and 75th Anniversary
- Does not fit four-door models; 2012-2018 vehicles require exhaust modification for front driveshaft clearance
- Control arm drop brackets correct geometry; rear coil correction plates adjust coil angle 10 degrees
- Coil springs calibrated to the factory spring rate; bolt-on install with no cutting called out in the feed
- Automatic models: factory oversize front driveshaft may contact the transmission pan under heavy articulation
- Two-box kit, shipping weight 118.1 lb — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit, fitment-checked
Rough Country 69330 is a 3.5-inch lift kit for 2007-2017 Jeep Wrangler JK 4WD two-door models, covering Sport, Sport S, X, Sahara, Rubicon, and the 70th and 75th Anniversary trims. It ships as a two-box kit with control arm drop brackets and rear coil correction plates. It does not fit four-door models, and 2012-2018 vehicles need exhaust modification for front driveshaft clearance.
This 3.5-inch lift kit for the 2007-2017 Jeep Wrangler JK 4WD is a two-door-only application — check your body style first. The kit arrives as two boxes and uses control arm drop brackets to bring suspension geometry back in line, plus rear coil correction plates that shift the coil angle by 10 degrees. Coil springs are matched to the factory rate. On 2012-2018 vehicles, exhaust modification is needed to clear the front driveshaft. Automatic-equipped Jeeps can see factory driveshaft-to-transmission-pan contact under heavy articulation with the sway bar links disconnected; a smaller-diameter aftermarket shaft resolves it. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 3.5in 2dr Kit Box 1608BOX1
- 1× 3.5in Kit Box 1693BOX1
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 69330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 69330 |
| UPC / GTIN | 00843030145651 |
| Lift height | 3.5 in |
| Shipping weight | 118.1 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here