3.5-Inch Lift Kit with N3 Shocks for 2020–2023 Jeep Wrangler JL 4WD
- Fits 2020–2023 Jeep Wrangler JL 4WD four-door models with the 3.0L EcoDiesel V6 only
- Does not fit Rubicon trims, two-door models, or non-diesel engines — check your build before ordering
- Kit contents: 3.5in front dual-rate coils, 3.5in rear coil, two N3 shock pairs, and the Stage 1 arm drop bracket box
- Bolt-on installation with no cutting or welding; listed install time 4-6 hours, downloadable installation guide available
- Aftermarket front CV driveshaft strongly recommended at this height — Rough Country points to SKU 5090.1A
- Tire chart shows 35x12.50R20 on 20x10 wheels at -19 offset requires minor trimming
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in motor weight this kit ONLY fits models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models. An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep JL lift kit 3.5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country's Jeep JL Front CV Driveshaft SKU: 5090.1A found HERE. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 78130 is a 3.5-inch lift kit for 2020–2023 Jeep Wrangler JL 4WD, built for four-door models with the 3.0L EcoDiesel V6 only. Rubicon trims are excluded because of coil spring rate differences. The kit ships with front dual-rate and rear lifted coils, two N3 shock pairs, control arm drop brackets, a forged adjustable track bar, and rear track bar bracket hardware.
This 3.5-inch lift kit covers 2020–2023 Jeep Wrangler JL 4WD four-door models equipped with the 3.0L EcoDiesel V6; it does not fit Rubicon trims. The bolt-on package pairs front dual-rate coils and rear lifted coils with two N3 shock pairs, a forged adjustable front track bar, control arm drop brackets to hold suspension angles, a rear track bar bracket, sway bar links, and bump stops. No cutting or welding is called for. Rough Country lists installation at 4-6 hours and strongly recommends an aftermarket front CV driveshaft (SKU 5090.1A) on any JL lift of 3.5 inches or taller. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 3.5in FR Dual Rate Coil Springs 9420
- 1× Diesel 3.5in Stage 1 Arm Drop Kit Box 78130BOX1
- 1× N3 Shock Pair 23218
- 1× N3 Shock Pair 23217
- 1× 3.5in RR Coil 9403
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 78130 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 78130 |
| UPC / GTIN | 00843030197681 |
| Lift height | 3.5 in |
| Shock package | N3 series |
| Shipping weight | 137 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here