3.5-Inch Lift Kit with M1R Shocks for 2024-2025 Jeep Wrangler 4WD
- Fits 2024-2025 Jeep Wrangler 4WD, 4-door models only — Rubicon, 392, and 3.0L EcoDiesel V6 builds are excluded
- Kit contents: Stage 1 arm drop box, 3.5-inch coils, and two M1R monotube reservoir shock pairs
- Forged track bar with 1.25-inch outer diameter plus rear track bar bracket for axle centering
- Bolt-on install with no cutting or welding — downloadable installation guide available
- Rough Country recommends an aftermarket front CV driveshaft (SKU 5090.1A) on any JL lift of 3.5 inches or more
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep JL lift kit 3.5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country's Jeep JL Front CV Driveshaft SKU: 5090.1A found HERE. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 79544 is a 3.5-inch lift kit for 2024-2025 Jeep Wrangler 4WD in Sport, Sport S, Sahara, Unlimited Sahara, Willys, and Unlimited Willys trims. The kit pairs a Stage 1 control arm drop package and coil springs with two pairs of M1R monotube reservoir shocks. Four-door models only, and it does not cover Rubicon, 392, or 3.0L EcoDiesel V6 builds.
This 3.5-inch lift kit for the 2024-2025 Jeep Wrangler 4WD ships as a Stage 1 arm drop box, matched coil springs, and two M1R monotube reservoir shock pairs, so the front and rear damping arrive together. A forged track bar with a 1.25-inch outer diameter and a rear track bar bracket hold axle centering, and the drop brackets keep control arm angles closer to factory geometry. Rough Country calls for no cutting or welding. Check the four-door, Rubicon, 392, and EcoDiesel qualifiers first, then work from the downloadable installation guide.
What’s in the box
Kit contents
- 1× 3.5in Stage 1 Arm Drop Kit Box 79530991
- 1× 3.5in Coils 67830BOX1
- 1× M1R MONOTUBE RESI SHOCK PAIR 770807RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770808RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79544 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79544 |
| UPC / GTIN | 00840269975011 |
| Lift height | 3.5 in |
| Shipping weight | 122 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch