3.5-Inch Lift Kit with V2 Shocks for 2024-2025 Jeep Wrangler 4WD
- Fits 2024-2025 Jeep Wrangler 4WD 4-door models only — check the fitment list for your trim
- Not for Rubicon, 392, or 3.0L EcoDiesel V6 models
- Kit contents: 3.5in Stage 1 arm drop package, 3.5in coils, and two V2 Monotube shock pairs
- Bolt-on installation with no cutting or welding called for; downloadable installation guide available
- Aftermarket front CV driveshaft strongly advised on any Jeep JL lift of 3.5 inches or taller (SKU 5090.1A)
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. An aftermarket driveshaft is HIGHLY RECOMMENDED for installation of any Jeep JL lift kit 3.5" or taller. The factory driveshaft will become damaged if the suspension reaches full droop or flex. Please use Rough Country's Jeep JL Front CV Driveshaft SKU: 5090.1A found HERE. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 79570 is a 3.5-inch lift kit for 2024-2025 Jeep Wrangler 4WD, built around Stage 1 control arm drop brackets, coil springs, and two V2 Monotube shock pairs. It covers 4-door models only, and it is not intended for Rubicon, 392, or 3.0L EcoDiesel V6 applications.
This 3.5-inch lift kit for the 2024-2025 Jeep Wrangler 4WD ships as a Stage 1 arm drop package: drop brackets to hold suspension angles where they belong, a forged track bar with a 1.25-inch outer diameter and OEM-style rubber bushings, coil springs matched to factory rates, and two V2 Monotube shock pairs for front and rear. Sahara, Sport, Willys, High Altitude, and 4xe trims are listed in the fitment section. Confirm your model is 4-door and not a Rubicon, 392, or EcoDiesel before ordering, and plan on an aftermarket front CV driveshaft such as SKU 5090.1A, since the factory shaft can be damaged at full droop.
What’s in the box
Kit contents
- 1× 3.5in Stage 1 Arm Drop Kit Box 79530991
- 1× 3.5in Coils 67830BOX1
- 1× V2 MONOTUBE SHOCK PAIR 760807
- 1× V2 MONOTUBE SHOCK PAIR 760808-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 79570 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 79570 |
| UPC / GTIN | 00840269945632 |
| Lift height | 3.5 in |
| Shipping weight | 119 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch