4-Inch Lift Kit with N3 Shocks for 2007-2017 Jeep Wrangler JK 4WD
- Fits 2007-2017 Jeep Wrangler JK 4WD — does not fit 4-door models
- Clears tires up to 35 inches; 1.5in wheel spacers required with stock wheels
- 2012-2018 models require exhaust modification for front driveshaft clearance (SKU 1030)
- Rear coil correction plates adjust coil spring angle 10 degrees
- Bolt-on design, no cutting — downloadable installation guide available
- Two-box kit: 682 kit box plus N3 shock box; shipping weight 98.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. If using stock wheels 1.5in wheel spacers are required. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 68230 is a 4-inch lift kit for the 2007-2017 Jeep Wrangler JK 4WD, shipping as a main kit box plus a matched N3 shock box. It does not fit 4-door models. Stock wheels call for 1.5in wheel spacers, and 2012-2018 vehicles need exhaust modification to clear the front driveshaft.
This 4-inch lift kit for the 2007-2017 Jeep Wrangler JK 4WD covers Sport, Sport S, X, Sahara, Rubicon, and the 70th and 75th Anniversary submodels listed in the fitment section. It bolts on without cutting, and rear coil correction plates reset the coil spring angle by 10 degrees. Clearance supports tires up to 35 inches; keep the stock wheels and you will need 1.5in spacers. Automatic-equipped rigs can see front driveshaft-to-transmission-pan contact under heavy articulation with the sway bar links disconnected. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 682 Kit Box 682BOX1
- 1× N3 Shock Box 681BOX2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 68230 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 68230 |
| UPC / GTIN | 00843030171155 |
| Lift height | 4 in |
| Shock package | N3 series |
| Shipping weight | 98 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here