4-Inch Lift Kit with M1 Shocks for Wrangler JK 2-Door (2007-2017)
- Two-door fitment only — 2007-2017 Jeep Wrangler JK 4WD; 4-door models are not covered
- Kit box contents: two M1 Monotube shock pairs plus rear coil correction plates (10 degrees of angle correction)
- Factory wheels require 1.5in wheel spacers; 2012-2018 models need exhaust modification, SKU 1030
- Bolts on without cutting; rated for tires up to 35 inches
- Automatic Jeeps with sway bar links disconnected can see front driveshaft-to-transmission-pan contact; a smaller-diameter shaft resolves it
- Downloadable installation guide available. Shipping weight: 97 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. If using stock wheels 1.5in wheel spacers are required. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with M1 Shocks, fitment-checked
Two-door only: Rough Country 68240 is a 4-inch lift kit built for the 2007-2017 Jeep Wrangler JK in Sport, Sport S, X, Sahara, Rubicon, and 70th and 75th Anniversary trim. The 682 kit box carries two M1 Monotube shock pairs. It does not fit 4-door Unlimited models, and stock wheels call for 1.5in wheel spacers.
The 4-inch lift kit for the 2007-2017 Jeep Wrangler JK 4WD is the two-door counterpart in this range — 4-door models are excluded outright. Inside the 682 kit box are two M1 Monotube shock pairs plus rear coil correction plates that shift the rear spring angle 10 degrees. Rough Country rates the clearance for tires up to 35 inches, and the hardware bolts on with no cutting. Plan for 1.5in wheel spacers with factory wheels; 2012-2018 Jeeps need exhaust modification (SKU 1030) for front driveshaft clearance. A downloadable installation guide is available. Shipping weight: 97 lb.
What’s in the box
Kit contents
- 1× 682 Kit Box 682BOX1
- 1× M1 MONOTUBE SHOCK PAIR 770740P
- 1× M1 MONOTUBE SHOCK PAIR 770750P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 68240 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 68240 |
| UPC / GTIN | 00840269918636 |
| Lift height | 4 in |
| Shock package | M1 series |
| Shipping weight | 97 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here