4-Inch Lift Kit with M1R Shocks for 2007–2017 Jeep Wrangler 4WD
- Fits 2007-2017 Jeep Wrangler 4WD, including Sport, Sport S, X, Sahara, Rubicon, and 70th/75th Anniversary — 4-door models are excluded
- Kit contents: 682 kit box plus two M1R monotube reservoir shock pairs (front and rear)
- Bolt-on design, no cutting; rear coil correction plates change coil angle by 10 degrees
- Clears tires up to 35 inches; 1.5in wheel spacers required with stock wheels
- 2012-2018 applications require exhaust modification for front driveshaft clearance
- Downloadable installation guide available — shipping weight: 97 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. If using stock wheels 1.5in wheel spacers are required. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 68244 is a 4-inch lift kit for 2007–2017 Jeep Wrangler 4WD, built around two pairs of M1R monotube reservoir shocks. It does not fit 4-door models. Stock wheels call for 1.5in wheel spacers, and 2012-2018 applications need exhaust modification for front driveshaft clearance.
This 4-inch lift kit for the 2007–2017 Jeep Wrangler 4WD ships as a kit box with front and rear M1R monotube reservoir shock pairs, and it bolts on without cutting. Coil correction plates reset the rear coil spring angle by 10 degrees, and the added height opens up room for tires up to 35 inches. Rough Country lists a driveshaft contact caution on automatic-equipped Wranglers during heavy articulation with the sway bar links disconnected. Read the full exclusion list, then pull the downloadable installation guide before you start.
What’s in the box
Kit contents
- 1× 682 Kit Box 682BOX1
- 1× M1R MONOTUBE RESI SHOCK PAIR 770740RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770750RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 68244 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 68244 |
| UPC / GTIN | 00840269975165 |
| Lift height | 4 in |
| Shipping weight | 97 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here