4-Inch Lift Kit with V2 Shocks for Jeep Wrangler JK (2007–2017)
- Fits 2007-2017 Jeep Wrangler JK 4WD two-door models — does not fit 4-door
- Kit contents: 682 kit box plus two V2 monotube shock pairs (760750-2 and 760740-2)
- Clearance for tires up to 35 inches; 1.5in wheel spacers required with stock wheels
- Rear coil correction plates change the rear coil angle by 10 degrees
- Bolt-on install with no cutting — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 4-door models
2012-2018 models require exhaust modifications to clear the front driveshaft SKU: 1030. If using stock wheels 1.5in wheel spacers are required. On Automatic equipped vehicles due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 68270 is a 4-inch lift kit for the 2007–2017 Jeep Wrangler JK 4WD in two-door form, built around two pairs of V2 monotube shocks. It bolts on without cutting and opens up room for tires up to 35 inches. It does not fit 4-door models, and stock wheels call for 1.5in wheel spacers.
This 4-inch lift kit for the 2007–2017 Jeep Wrangler JK 4WD covers Sport, Sport S, X, Sahara, Rubicon, and the 70th and 75th Anniversary trims listed in the fitment section. Rear coil correction plates reset the coil spring angle by 10 degrees. Read the qualifiers first: 4-door models are out, 2012-2018 vehicles need exhaust modification for front driveshaft clearance (SKU 1030), and automatic-equipped Jeeps can see front driveshaft-to-transmission-pan contact under heavy articulation, which an aftermarket smaller-diameter shaft resolves. A downloadable Rough Country installation guide is available.
What’s in the box
Kit contents
- 1× 682 Kit Box 682BOX1
- 1× V2 MONOTUBE SHOCK PAIR 760750-2
- 1× V2 MONOTUBE SHOCK PAIR 760740-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 68270 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 68270 |
| UPC / GTIN | 00843030171179 |
| Lift height | 4 in |
| Shipping weight | 95.15 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here