
5-Inch Lift Kit with V2 Shocks for 2011–2013 Ram 2500/3500 4WD
- Fits 2011–2013 Ram 2500 4WD and 2011–2012 Ram 3500 4WD — check the fitment list for your trim
- Does not fit dually models; does not fit Power Wagon models, which use electronic sway bar disconnects
- Kit contents: coils, pitman arm, black U-bolts, drop bracket box kit, and two V2 monotube shock pairs
- Works with factory 17-inch and 20-inch wheels
- Two-piece driveshaft and carrier bearing trucks such as the Mega Cab may show take-off vibration; shimming the carrier bearing down addresses it
- Minor drilling required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Dually models
- Power Wagon models
Requires minor drilling. On vehicles equipped with a two-piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take-off vibration depending on the severity this can be corrected by shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 34970 is a 5-inch lift kit for 2011–2013 Ram 2500 4WD and 2011–2012 Ram 3500 4WD, built around V2 monotube shocks, front coils, control arm drop brackets, a pitman arm, and black U-bolts. Minor drilling is part of the job. It does not fit dually models, and it does not fit Power Wagon models.
This 5-inch lift kit for the 2011–2013 Ram 2500 4WD and 2011–2012 Ram 3500 4WD covers Tradesman through Laramie Longhorn trims listed in the fitment section. The box carries front coils, a pitman arm, black U-bolts, a drop bracket box kit, and two V2 monotube shock pairs, so the front and rear damping arrives with the kit. Drop brackets reduce control arm angle and a track bar bracket keeps the front axle centered, while factory 17-inch and 20-inch wheels can stay on the truck. Plan on minor drilling, then work from the downloadable Rough Country installation guide.
What’s in the box
Kit contents
- 1× Coils 9291
- 1× Pitman Arm 6615
- 1× 3 4 Blck Ubolts 6599
- 1× Drop Bracket Box Kit 1349.3
- 1× V2 MONOTUBE SHOCK PAIR 760757
- 1× V2 MONOTUBE SHOCK PAIR 760744-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 34970 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 34970 |
| UPC / GTIN | 00840269969065 |
| Lift height | 5 in |
| Shipping weight | 178.4 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here