5-Inch Lift Kit with M1 Monotube Shocks for 2014-2018 Ram 2500 4WD — Part 36740
- Fits 2014-2018 Ram 2500 4WD diesel models — see the full fitment list on this page
- Does not fit Power Wagon models or any gas engine model
- Kit contents include driver and passenger radius arms, front and rear box kits, a track bar bracket, and two M1 monotube shock pairs
- Compatible with rear coil spring and rear air ride suspensions; air ride trucks can set rear ride height up to 1-inch higher than the front
- Mega Cab trucks with a two piece driveshaft and carrier bearing may show take-off vibration that shimming the carrier bearing can address
- Drilling and cutting required — downloadable installation guide available. Shipping weight: 242.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- "Power Wagon" models
- Gas engine models
Requires drilling and cutting. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with M1 Monotube Shocks, fitment-checked
Rough Country 36740 is a 5-inch lift kit for 2014-2018 Ram 2500 4WD models with a diesel engine. The kit pairs driver and passenger radius arms with two M1 monotube shock pairs, front and rear box kits, and a track bar bracket. It does not fit Power Wagon models or gas engine models, and installation calls for drilling and cutting.
This 5-inch lift kit for the 2014-2018 Ram 2500 4WD covers Tradesman through Laramie Limited trims listed in the fitment section, and works with either rear coil spring or rear air ride setups. Replacement radius arms hold a closer-to-factory arm angle on rubber bushings, while the included track bar bracket keeps the front axle centered. Air ride trucks can use the rear ride height brackets to set the back up to 1-inch above the front. Plan on drilling and cutting, and read the Mega Cab driveshaft vibration note before you start. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Driver Radius Arm 1368996
- 1× RR Box Kit 1368BOX5
- 1× FR Box Kit 1373BOX1
- 1× M1 MONOTUBE SHOCK PAIR 770801P
- 1× M1 MONOTUBE SHOCK PAIR 770818P
- 1× 5in Diesel 9463
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 36740 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 36740 |
| UPC / GTIN | 00840269917370 |
| Lift height | 5 in |
| Shock package | M1 series |
| Shipping weight | 242 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here