6-Inch Lift Kit with V2 Shocks for 1997–2006 Jeep Wrangler 4WD
- Fits 1997–2006 Jeep Wrangler 4WD, Unlimited and Rubicon submodels included — check the fitment list
- Kit contents: 6-inch progressive-rate coils, two V2 monotube shock pairs, forged front adjustable track bar (4-6 inch lift), rear shock relocation brackets
- Adjustable arms use rubber bushings plus flex joints — 2.5" body, 1.25" thread, 20 degrees of upper travel and 35 degrees lower
- Transfer case drop kit or SYE with CV driveshaft recommended against driveline vibration; Rubicon needs neither, but a CV driveshaft is still suggested
- Bolt-on install with sway bar quick disconnects — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Transfer case drop kit or Slip Yoke Eliminator with CV Drive Shaft is recommended to avoid driveline vibration. View CV Drive Shafts here. Rubicon models do NOT need a SYE kit or transfer case drop but a CV driveshaft is still recommended. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 66270 is a 6-inch lift kit for the 1997–2006 Jeep Wrangler TJ 4WD, including Unlimited and Rubicon submodels. The kit pairs progressive-rate 6-inch coils with two pairs of V2 monotube shocks, a forged front adjustable track bar rated for 4-6 inches of lift, rear shock relocation brackets, adjustable control arms, and sway bar quick disconnects.
This 6-inch lift kit for the 1997–2006 Jeep Wrangler 4WD covers SE, X, Sport, Sahara, Rubicon, Unlimited, Unlimited Rubicon, and 65th Anniversary Edition applications listed in the fitment section. Rough Country calls out a transfer case drop kit or a Slip Yoke Eliminator with CV driveshaft as the recommended way to keep driveline vibration in check; Rubicon models can skip the SYE and transfer case drop, though a CV driveshaft is still advised. Control arm flex joints use a 2.5" body with 1.25" thread, pivoting to 20 degrees up top and 35 degrees below. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 1661x Kit Box 1661XBOX3
- 1× 662x Box Kit 1662XBOX3
- 1× 6in Coils 1662C
- 1× Track Bar 1052$169.95
- 1× Shock Relocation Brackets 1185$24.95
- 1× V2 MONOTUBE SHOCK PAIR 760743
- 1× V2 MONOTUBE SHOCK PAIR 760746
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 66270 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 66270 |
| UPC / GTIN | 00840269968822 |
| Lift height | 6 in |
| Shipping weight | 177 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch