Front Coilover Shock Component Box for Jeep Wrangler JL
- Front coilover shock hardware with front coilover bracket
- 3.5-6 in. lift band
- 2018 Jeep Wrangler in Sport, Sport S and Rubicon
- An aftermarket rear driveshaft is required at this height
- Front only — rear hardware is a separate box
The Trail Fortress check
Will it fit your truck?
✓ Fits
3.5-6 in. Lift; Incl. Front Coil Over Bracket; For 2 Door Models Rear Aftermarket Driveshaft Required~For 4 Door Models Rear Aftermarket Driveshaft Recommended~Requires 4.5 in Back Spacing On Wheels Fitment on this page is based on the manufacturer’s application data.
About this part
Front Coilover Shock Component Box, fitment-checked
The front half of a coilover conversion, including the front coilover bracket, for the 2018 Wrangler at 3.5-6 in. of lift. Read the driveshaft note: two-door and four-door models both call for an aftermarket rear driveshaft at this height.
Converting to coilovers means new mounting as well as new dampers, and this box supplies the front bracket alongside the hardware. It covers a 3.5-6 in. band on the 2018 Wrangler in Sport, Sport S and Rubicon. The condition attached to it is about the other end of the vehicle: Skyjacker notes that both two-door and four-door models need an aftermarket rear driveshaft at these heights, which is a separate purchase and a real cost. 21.9 lb boxed. The rear coilover hardware is its own part number.
Specifications
Specs
| Brand | Skyjacker |
| Part number | JL36FLSB |
| UPC / GTIN | 00803696259307 |
| Shipping weight | 21.9 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
4 Inch
4 Inch
3.5 Inch
3.5 Inch
3.5 Inch
3.5 Inch
4 Inch