
2.5-Inch Lift Kit with N3 Shocks for Jeep Wrangler TJ 4WD (1997–2006)
- Fits 1997–2006 Jeep Wrangler TJ 4WD, SE submodel — 4-cylinder applications only
- Does not fit 6-cylinder models
- Kit contents: 2.5-inch lift components plus 2.5-inch N3 shocks for the Wrangler TJ
- Bolt-on assembly — no welding or custom fabrication called for
- Oversize tires on stock wheels can contact the lower control arm at full turn; aftermarket wheels recommended
- Downloadable installation guide available. Shipping weight: 48 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with 6cyl engine
The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn. Aftermarket wheels are recommended. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 652.20 pairs a 2.5-inch lift kit with matched N3 shocks for the 1997–2006 Jeep Wrangler TJ 4WD (SE, 4-cylinder). It does not fit 6-cylinder models. Coil springs are tuned close to factory spring rate, and the assembly bolts on without welding or cutting.
This 2.5-inch lift kit for the 1997–2006 Jeep Wrangler TJ 4WD is built around the 4-cylinder application, so 6-cylinder Wranglers are outside its fitment. Two boxes make up the kit: the 2.5-inch lift components and a set of 2.5-inch N3 shocks. The added height opens up room for larger wheel and tire combinations, though running oversize tires on the stock wheels can let a tire touch the lower control arm at full lock — aftermarket wheels are the recommended route. A downloadable Rough Country installation guide is available before you start.
What’s in the box
Kit contents
- 1× 2.5 Inch Lift Kit 652
- 1× 2.5 Inch N3 Shocks 1653BOX1
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 652.20 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 652.20 |
| UPC / GTIN | 00843030129484 |
| Lift height | 2.5 in |
| Shock package | N3 series |
| Shipping weight | 48 lb |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here