3.5-Inch Lift Kit with M1R Shocks for 2019–2023 Jeep Wrangler 4WD — Part 65444
- Fits 2019–2023 Jeep Wrangler 4WD, 4-door models only — check the full trim list
- Does not fit Rubicon, 392, 4xe, or 3.0L EcoDiesel V6 Wranglers
- Kit contents: 3.5-inch coils, two M1R monotube reservoir shock pairs, forged front track bar (2.5-6 inch lift), Dana 30 front CV drive shaft
- Forged solid-steel track bar with 1.25-inch outer diameter and OEM-style rubber bushings
- Bolt-on install with no cutting or welding — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 65444 is a 3.5-inch lift kit for 2019–2023 Jeep Wrangler 4WD in 4-door form only. Two pairs of M1R monotube reservoir shocks, 3.5-inch coils, a forged front track bar rated for 2.5-6 inches of lift, and a Dana 30 front CV drive shaft come in the box. It does not fit Rubicon, 392, 4xe, or 3.0L EcoDiesel V6 models.
This 3.5-inch lift kit for the 2019–2023 Jeep Wrangler 4WD covers Sport, Sport S, Sahara, Willys, Freedom, High Altitude, High Tide, Moab, and Islander trims listed in the fitment section, in 4-door configuration only. Rubicon, 392, 4xe, and 3.0L EcoDiesel V6 Wranglers are outside the coil spring and motor weight range this kit was built around. The bolt-on design skips cutting and welding, and control arm drop brackets keep the factory arm geometry in place. Confirm your trim and drivetrain against the exclusions, then work from the downloadable Rough Country installation guide.
What’s in the box
Kit contents
- 1× 3.5in Coils 67830BOX1
- 1× 3.5in Kit Box 69044991
- 1× Track Bar 11061
- 1× CV Drive Shaft 5090.1A
- 1× M1R MONOTUBE RESI SHOCK PAIR 770806RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770807RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 65444 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 65444 |
| UPC / GTIN | 00840269975769 |
| Lift height | 3.5 in |
| Shipping weight | 149 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here