3.5-Inch Lift Kit with M1R Shocks for 2024-2026 Jeep Wrangler 4WD with Front CV Drive Shaft
- Fits 2024-2026 Jeep Wrangler 4WD in Sport, Sport S, Sahara, Willys, Unlimited Sahara, and Unlimited Willys trims
- 4-door models only — does not fit 4xe, Rubicon, or 392 models
- Kit contents: 3.5-inch coils, adjustable lower control arms, forged front track bar, front Dana 30 CV driveshaft, M1R monotube reservoir shocks
- Forged front track bar sized at 1.25-inch outer diameter, covering 2.5-6 inch lift heights
- Bolt-on install with no cutting or welding — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with M1R Shocks, fitment-checked
Rough Country 91544 is a 3.5-inch lift kit for 2024-2026 Jeep Wrangler 4WD 4-door models, including Sport, Sport S, Sahara, Willys, Unlimited Sahara, and Unlimited Willys. The kit pairs 3.5-inch coil springs with M1R monotube reservoir shocks, adjustable lower control arms, a forged front track bar, and a front CV driveshaft for the Dana 30. It is not for 4xe, Rubicon, or 392 models.
This 3.5-inch lift kit for the 2024-2026 Jeep Wrangler 4WD ships as a full package: 3.5-inch coils, two adjustable lower control arm boxes, a forged front track bar rated for 2.5-6 inch lift heights, a front CV driveshaft for the Dana 30, and two pairs of M1R monotube reservoir shocks. The forged bar runs a 1.25-inch outer diameter with OEM-style rubber bushings. Installation is bolt-on, with no cutting or welding called out, and a downloadable Rough Country installation guide is available. Confirm your Wrangler is a 4-door and not a 4xe, Rubicon, or 392 before ordering.
What’s in the box
Kit contents
- 1× 3.5in Coils 67830BOX1
- 1× 3.5in Adj Lower Control Arm Kit Box 91530991
- 1× 3.5in Adj Lower Control Arm Kit Box 91544992
- 1× Track Bar 11061
- 1× CV Drive Shaft 5090.1A
- 1× M1R MONOTUBE RESI SHOCK PAIR 770806RESP
- 1× M1R MONOTUBE RESI SHOCK PAIR 770807RESP
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 91544 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 91544 |
| UPC / GTIN | 00840269975882 |
| Lift height | 3.5 in |
| Shipping weight | 164 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here